Schneider Electric ALTIVAR 58 TRX Przewodnik Instalacji Pobierz pdf (Strona 23)

VVDED397047USR6/03 Chapter 2—Menus

06/2003 Language Menu

CHAPTER 2—MENUS

This chapter explains menus and parameter functions.

Language Menu

The Language menu (see Figure 7 on page 21) is accessible in each

access level. The available languages are English (factory setting),

French, German, Spanish, or Italian. The language can be modified

with the motor stopped or running.

Macro-Configuration Menu

Selecting a macro-configuration automatically configures the drive

controller for an application. The Macro-Configuration menu can

always be displayed, but can only be modified when the access level

switch is in the total unlock, , position and when the motor is

stopped. Three application types are available for drive controllers up

to 100 hp:

• Material handling (Hdg)

• Variable torque for pump and fan applications (VT)

• General use (GEn)

The 125–500 hp drive controllers have only the variable torque

macro.

The macro-configuration automatically assigns the inputs and outputs

to functions suitable for the application. The parameters related to the

I/O functions are then available for adjustment. The factory-set

macro-configuration is Material Handling. If you customize the I/O

to your application, the macro-configuration screen displays

CUS:Customize as shown in Figure 10 on page 26. Table 3 shows

the drive controller I/O assignments as a function of the macro-

configuration selected when the drive controller is set for 2-wire

control. For the logic input assignments when the drive controller is

set for 3-wire control, refer to Table 12 on page 52.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 125 126

Brak uwag

Schneider Electric ALTIVAR 58 TRX Przewodnik Instalacji Strona 23