Schneider Electric Xantrex XW Przewodnik Instalacji Pobierz pdf (Strona 56)

Specifications

A–6 975-0540-01-01 Revision B

This guide is for use by qualified personnel only.

Accessories

The SCP (865-1050) is required for installation of the charge controller, and it is

strongly recommended for continued operation of the charge controller. It is the

primary interface to the charge controller. It must be used for setup and

configuration, and it is recommended to be used for monitoring and fault

reporting once installation is complete. Only one SCP is required to monitor

multiple charge controllers.

The following accessories are optional:

Regulatory Approvals

Certified to UL 1741 and to CSA 107.1 and carries the c(CSA)us mark.

EMC - North America:

• FCC Part-15 sub part B, Class B

• Industry Canada ICES-003, Class B

CE Marked and complies with the following:

Low Voltage Directive 2006/95/EC, per:

• EN50178

Electronic Equipment for Use in Power Installations.

EMC Directive 2004/108/EC, per:

• EN61000-6-3 Emission standard for residential, commercial, and light-

industrial environments

• EN61000-6-1 Immunity for residential, commercial, and light-industrial

environments

NOTICE

You must use an SCP with firmware version 1.05.00 or higher for full

compatibility with the charge controller. For information on updating your

firmware, contact customer service. The Xantrex XW Config tool is required for

upgrading.

Gateway 865-1055

Xanbus power supply 865-1057

XW Config

(Provides the ability to update system firmware and monitor

system status. See “Xantrex XW Config User’s Guide”

Part number 975-0365-01-01)

865-1155

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62

Brak uwag

Schneider Electric Xantrex XW Przewodnik Instalacji Strona 56