Schneider Electric Xantrex XW Przewodnik Instalacji Pobierz pdf (Strona 41)

Commissioning

975-0540-01-01 Revision B 2–23

This guide is for use by qualified personnel only.

6. Press Enter to select Advanced Settings.

The Config menu opens.

7. Scroll to Multi Unit Config, and then press Enter.

The Multi menu opens. The LEDs on the charge controller you are

configuring will start to flash when you enter this menu, providing visual

confirmation of the charge controller you are configuring.

8. Scroll to Dev Number, and then press Enter. Scroll again to set it to a number

other than 00, and then press Enter to confirm the new device number.

The device number can be set to any number between 01 and 31. If you are

commissioning multiple charge controllers, the manufacturer recommends

using 01 for the first charge controller.

9. Press Exit until the Select Device menu is displayed.

The charge controller appears as XW MPPT80 xx on the menu, where xx is

the device number you selected.

10. Repeat steps 3 through 9 if you are commissioning multiple charge

controllers.

Configuring Connections and Charger Settings

To configure connections and charger settings for a charge controller:

1. On the Select Device menu, select XW MPPT80 xx, where xx is the

device number.

The Setup menu opens.

2. Press Enter to select Advanced Settings.

The Config menu opens.

3. Scroll to Multi Unit Config, and then press Enter.

The Multi menu opens.

4. Scroll to Connections, and then press Enter.

The Conn menu opens.

WARNING

HAZARD OF FIRE AND EXPLOSION

Battery charging settings must be configured by qualified personnel in

accordance with the battery manufacturer's recommended charging

instructions.

This section covers basic default settings. See the Xantrex XW MPPT 80 600

Solar Charge Controller Operation Guide for additional configuration

information and details including setting descriptions and value ranges.

Failure to follow these instructions can result in death or serious injury.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

Brak uwag

Schneider Electric Xantrex XW Przewodnik Instalacji Strona 41